With a simple USB drive and Tails, you can turn any PC into a secure, Tor-encrypted workstation in seconds.

Rolling back the Linux kernel can save the day when a bad update breaks your system. It should be done carefully, with backups and verification. Use it to regain a stable state, then address the root ...

Getting started guide & review of the SONOFF Dongle Plus MG24 Zigbee adapter with Home Assistant, AirGuard TH monitor, and ...

Nvidia has updated its Linux driver lineup with the introduction of branch 590, and this release formally discontinues support for older Maxwell-, Pascal-, and Volta-based GPUs. As a result, a wide ...

Chances are high that most of us deal with USB cables at least once a day. Whether that's because you're plugging in your phone to charge, or connecting a device to your PC, USBs are a common part of ...

The FTDI FT260 chip implements USB to I2C/UART bridges through two USB HID class interfaces. The first is for I2C and the second for UART. Each interface is independent, and the kernel detects it as a ...

The primary method here is to visit the FTDI website and search & download the drivers you’re looking for. Here’s how that can be done: Open your web browser and visit the FTDI driver download center ...

Describe the issue you are experiencing Hello, I’m running Home Assistant OS on an Acemagic T9 Pro MiniPC, which has onboard LEDs controlled via the motherboard’s built-in CH341 USB-serial interface.

USB-to-serial debug boards are commonly used for board bring-up, checking for issues when a board does not boot, or accessing the serial console in systems without networking or video output. You’d ...

The distro in question is Proxmox though that likely isn’t a factor. It’s straightforward to start the systemd unit that fires up console on /dev/ttyUSB0 and connect to it, log in, etc…. But I don’t ...